...
| Where collectd is running | Plugin | Type | Type Instance | Description | comment | Additional Info |
|---|---|---|---|---|---|---|
| Host/guest | CPU | percent/nanoseconds | idle | Time CPU spends idle. | Can be per cpu/aggregate across all the cpus.For more info, please see:http://man7.org/linux/man-pages/man1/top.1.html http://blog.scoutapp.com/articles/2015/02/24/understanding-linuxs-cpu-stats Note that jiffies operate on a variable time base, HZ. The default value of HZ should be used (100), yielding a jiffy value of 0.01 seconds) [time(7)]. Also, the actual number of jiffies in each second is subject to system factors, such as use of virtualization. Thus, the percent calculation based on jiffies will nominally sum to 100% plus or minus error. | |
| percent/nanoseconds | nice | Time the CPU spent running user space processes that have been niced. The priority level a user space process can be tweaked by adjusting its niceness. | ||||
| percent/nanoseconds | interrupt | Time the CPU has spent servicing interrupts. | ||||
| percent/nanoseconds | softirq | (apparently) Time spent handling interrupts that are synthesized, and almost as important as Hardware interrupts (above). "In current kernels there are ten softirq vectors defined; two for tasklet processing, two for networking, two for the block layer, two for timers, and one each for the scheduler and read-copy-update processing. The kernel maintains a per-CPU bitmask indicating which softirqs need processing at any given time." [Ref] | ||||
| percent/nanoseconds | steal | CPU steal is a measure of the fraction of time that a machine is in a state of “involuntary wait.” It is time for which the kernel cannot otherwise account in one of the traditional classifications like user, system, or idle. It is time that went missing, from the perspective of the kernel.http://www.stackdriver.com/understanding-cpu-steal-experiment/ | ||||
| percent/nanoseconds | system | Time that the CPU spent running the kernel. | ||||
| percent/nanoseconds | user | Time CPU spends running un-niced user space processes. | ||||
| percent/nanoseconds | wait | The time the CPU spends idle while waiting for an I/O operation to complete | ||||
| Interface | if_dropped | in | The total number of received dropped packets. | |||
| if_errors | in | The total number of received error packets. | http://www.onlamp.com/pub/a/linux/2000/11/16/LinuxAdmin.html | |||
| if_octets | in | The total number of received bytes. | ||||
| if_packets | in | The total number of received packets. | ||||
| if_dropped | out | The total number of transmit packets dropped | ||||
| if_errors | out | The total number of transmit error packets. (This is the total of error conditions encountered when attempting to transmit a packet. The code here explains the possibilities, but this code is no longer present in /net/core/dev.c master at present - it appears to have moved to /net/core/net-procfs.c.) | ||||
| if_octets | out | The total number of bytes transmitted | ||||
| if_packets | out | The total number of transmitted packets | ||||
| Memory | memory | buffered | The amount, in kibibytes, of temporary storage for raw disk blocks. | https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-proc-meminfo.html | ||
| memory | cached | The amount of physical RAM, in kibibytes, left unused by the system. | ||||
| memory | free | The amount of physical RAM, in kibibytes, left unused by the system. | ||||
| memory | slab_recl | The part of Slab that can be reclaimed, such as caches. | Slab — The total amount of memory, in kibibytes, used by the kernel to cache data structures for its own use | |||
| memory | slab_unrecl | The part of Slab that cannot be reclaimed even when lacking memory | https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-proc-meminfo.html | |||
| memory | used | mem_used = mem_total - (mem_free + mem_buffered + mem_cached + mem_slab_total); | https://github.com/collectd/collectd/blob/master/src/memory.c#L349 | |||
| disk | disk_io_time | io_time | time spent doing I/Os (ms). You can treat this metric as a device load percentage (Value of 1 sec time spent matches 100% of load). | |||
| disk_io_time | weighted_io_time | measure of both I/O completion time and the backlog that may be accumulating. | ||||
| disk_merged | read | the number of operations, that could be merged into other, already queued operations, i. e. one physical disk access served two or more logical operations. Of course, the higher that number, the better. | ||||
| disk_merged | write | the number of operations, that could be merged into other, already queued operations, i. e. one physical disk access served two or more logical operations. Of course, the higher that number, the better. | ||||
| disk_octects | read | the number of octets read from a disk or partition | ||||
| disk_octects | write | the number of octets written to a disk or partition | ||||
| disk_ops | read | the number of read operations issued to the disk | ||||
| disk_ops | write | the number of write operations issued to the disk | ||||
| disk_time | read | the average time an I/O-operation took to complete. Note from collectd Since this is a little messy to calculate take the actual values with a grain of salt. | ||||
| disk_time | write | the average time an I/O-operation took to complete. Note from collectd Since this is a little messy to calculate take the actual values with a grain of salt. | https://collectd.org/wiki/index.php/Plugin:Disk | |||
| pending_operations | shows queue size of pending I/O operations. | http://lxr.free-electrons.com/source/include/uapi/linux/if_link.h#L43 | ||||
| Ping | ping | Network latency is measured as a round-trip time in milliseconds. An ICMP “echo request” is sent to a host and the time needed for its echo-reply to arrive is measured. | Latency | |||
| ping_droprate | droprate = ((double) (pkg_sent - pkg_recv)) / ((double) pkg_sent); | https://github.com/collectd/collectd/blob/master/src/ping.c#L703 | ||||
| ping_stddev | if pkg_recv > 1 latency_stddev = sqrt (((((double) pkg_recv) * latency_squared) - (latency_total * latency_total)) / ((double) (pkg_recv * (pkg_recv - 1)))); | https://github.com/collectd/collectd/blob/master/src/ping.c#L698 | ||||
| pkg_recv = # of echo-reply messages receivedlatency_squared = latency * latency (for a received echo-reply message)latency_total = the total latency for received echo-reply messages | ||||||
| load | load | shortterm | load average figures giving the number of jobs in the run queue (state R) or waiting for disk I/O (state D) averaged over 1 Minute | http://man7.org/linux/man-pages/man5/proc.5.html | ||
| measured CPU and IO utilization for 1 min using /proc/loadavg | https://github.com/collectd/collectd/blob/master/src/load.c | |||||
| midterm | load average figures giving the number of jobs in the run queue (state R) or waiting for disk I/O (state D) averaged over 5 Minutes | |||||
| measured CPU and IO utilization for 5 mins using /proc/loadavg | ||||||
| longterm | load average figures giving the number of jobs in the run queue (state R) or waiting for disk I/O (state D) averaged over 15 Minutes | |||||
| measured CPU and IO utilization for 15 mins using /proc/loadavg | ||||||
| OVS events | gauge | link_status | Link status of the OvS interface: UP or DOWN | |||
| OVS Stats | if_collisions | Number of collisions. | per interface | |||
| if_rx_octets | Number of received bytes. | http://openvswitch.org/ovs-vswitchd.conf.db.5.pdf | ||||
| if_rx_errors | crc | Number of CRC errors. | ||||
| if_dropped rx: | Number of packets dropped by RX. | |||||
| if_errors rx: | Total number of receive errors, greater than or equal to the sum of the RX errors above. | |||||
| if_rx_errors | frame | Number of frame alignment errors. | ||||
| if_rx_errors | over | Number of packets with RX overrun. | ||||
| if_packets rx: | Number of received packets | |||||
| if_tx_octets | Number of transmitted bytes | |||||
| if_dropped tx: | Number of packets dropped by TX | |||||
| if_errors tx: | Total number of transmit errors, greater than or equal to the sum of the TX errors above. | |||||
| if_packets tx: | Number of transmitted packets | |||||
| if_packets rx: | 1_to_64_packets | The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets). | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets rx: | 65_to_127_packets | The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets rx: | 128_to_255_packets | The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets rx: | 256_to_511_packets | The total number of packets (including badpackets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets rx: | 512_to_1023_packets | The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets rx: | 1024_to_1522_packets | The total number of packets (including bad packets) received that were between 1523 and max octets in length inclusive (excluding framing bits but including FCS octets). | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets rx: | 1523_to_max_packets | The total number of packets (including bad packets) received that were between 1523 and max octets in length inclusive (excluding framing bits but including FCS octets). | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets tx: | 1_to_64_packets | The total number of packets transmitted that were 64 octets in length. | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets tx: | 65_to_127_packets | The total number of packets received that were between 65 and 127 octets in length inclusive | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets tx: | 128_to_255_packets | The total number of packets received that were between 128 and 255 octets in length inclusive | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets tx: | 256_to_511_packets | The total number of packets received that were between 256 and 511 octets in length inclusive | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets tx: | 512_to_1023_packets | The total number of packets received that were between 512 and 1023 octets in length inclusive | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets tx: | 1024_to_1522_packets | The total number of packets received that were between 1024 and 1518 octets in length inclusive | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets tx: | 1523_to_max_packets | The total number of packets received that were between 1523 and max octets in length inclusive | supported in OvS v2.6+ and dpdk ports only | |||
| if_multicast | tx_multicast_packets | The number of good packets transmitted that were directed to a multicast. Note: that this number does not include packets directed to the broadcast address | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets rx: | broadcast_packets | The total number of packets (including bad packets, broadcast packets, and multicast packets) received. | supported in OvS v2.6+ and dpdk ports only | |||
| if_packets tx: | broadcast_packets | The number of good packets transmitted that were directed to the broadcast address. | supported in OvS v2.6+ and dpdk ports only | |||
| if_rx_errors | rx_undersized_errors | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | supported in OvS v2.6+ and dpdk ports only | |||
| if_rx_errors | rx_oversize_errors | The total number of packets received that were longer than max octets (excluding framing bits, but including FCS octets) and were otherwise well formed. | supported in OvS v2.6+ and dpdk ports only | |||
| if_rx_errors | rx_fragmented_errors | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note: that it is entirely normal for rx_fragmented_errors to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits | supported in OvS v2.6+ and dpdk ports only | |||
| if_rx_errors | rx_jabber_errors | The total number of jabber packets received that had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | supported in OvS v2.6+ and dpdk ports only | |||
| Hugepages | bytes | used | Number of used hugepages in bytes | total/pernode/both | ||
| bytes | free | Number of free hugepages in bytes | ||||
Virtual memory makes it easy for several processes to share memory [TM1] . Each process has its own virtual address space, which is mapped to physical memory by the operating system” [TM2] . The process views the virtual memory address space as a contiguous/linear address space, but in reality – the virtual addresses need to be mapped to physical addresses, this is typically done by the Memory Management Unit (MMU) on the CPU. “There are two ways to enable the system to manage large amounts of memory:
The first method is expensive, since the hardware memory management unit in a modern processor only supports hundreds or thousands of page table entries. Additionally, hardware and memory management algorithms that work well with thousands of pages (megabytes of memory) may have difficulty performing well with millions (or even billions) of pages. This results in performance issues: when an application needs to use more memory pages than the memory management unit supports, the system falls back to slower, software-based memory management, which causes the entire system to run more slowly. Huge pages are blocks of memory that come in 2MB and 1GB sizes. The page tables used by the 2MB pages are suitable for managing multiple gigabytes of memory, whereas the page tables of 1GB pages are best for scaling to terabytes of memory” [TM3] More info on virtual memory and TLB lookups can be found: | ||||||
| bytes | free | Number of free hugepages in bytes | ||||
| vmpage_number | used | Number of used hugepages in | vmpage_number | used | Number of used hugepages in numbers | |
| vmpage_number | free | Number of free hugepages in numbers | ||||
| percent | used | Number of used hugepages in percent | ||||
| percent | free | Number of free hugepages in percent | ||||
| processes | fork_rate | the number of threads created since the last reboot | The information comes mainly from /proc/PID/status, /proc/PID/psinfo and /proc/PID/usage. | |||
| ps_state | blocked | the number of processes in a blocked state | https://collectd.org/wiki/index.php/Plugin:Processes | |||
| ps_state | paging | the number of processes in a paging state | http://man7.org/linux/man-pages/man5/proc.5.html | |||
| ps_state | running | the number of processes in a running state | ||||
| ps_state | sleeping | the number of processes in a sleeping state | ||||
| ps_state | stopped | the number of processes in a stopped state | ||||
| ps_state | zombies | the number of processes in a Zombie state | ||||
| Host only | Libvirt | disk_octets | DISK | number of read/write bytes as unsigned long long. | ||
| disk_ops | DISK | number of read/write requests | ||||
| disk_time | flush-DISK | total time spend on cache reads/writes in nano-seconds | ||||
| if_dropped | INTERFACE | packets dropped on rx/tx as unsigned long long | ||||
| if_errors | INTERFACE | rx/tx errors as unsigned long long | ||||
| if_octets | INTERFACE | bytes received/transmitted as unsigned long long | ||||
| if_packets | INTERFACE | packets received/transmitted as unsigned long long | ||||
| memory | actual_balloon | Resident Set Size of the process running the domain. This value is in kB | https://libvirt.org/html/libvirt-libvirt-domain.html#virDomainMemoryStatStruct | |||
| memory | rss | How much the balloon can be inflated without pushing the guest system to swap, corresponds to 'Available' in /proc/meminfo | ||||
| memory | swap_in | The total amount of memory written out to swap space (in kB). | ||||
| memory | total | the memory in KBytes used by the domain | ||||
| virt_cpu_total | the CPU time used in nanoseconds | |||||
| virt_vcpu | VCPU_NR | the CPU time used in nanoseconds per cpu | ||||
| cpu_affinity | vcpu_NR-cpu_NR | pinning of domain VCPUs to host physical CPUs. | Value stored is a boolean. | |||
| job_stats | * | Information about progress of a background/completed job on a domain. | Number of metrics depend on job type. Check API documentation for more information: virDomainGetJobStats | |||
| disk_error | DISK_NAME | Disk error code | Metric isn’t dispatched for disk with no errors | |||
| percent | virt_cpu_total | CPU utilization in percentage per domain | ||||
| perf | * | Performance monitoring events | Number of metrics depends on libvirt API version. Following perf metric are avilable in libvirt API version 2.4. To collectd perf metric they must be enabled in domain and supported by the platform. | |||
| perf | perf_cmt | usage of l3 cache in bytes by applications running on the platform | ||||
| perf | perf_ mbmt | total system bandwidth from one level of cache | ||||
| perf | perf_ mbml | bandwidth of memory traffic for a memory controller | ||||
| perf | perf_cpu_cycles | the count of cpu cycles (total/elapsed) | ||||
| perf | perf_instructions | the count of instructions by applications running on the platform | ||||
| perf | perf_cache_references | the count of cache hits by applications running on the platform | ||||
| perf | perf_cache_misses | the count of cache misses by applications running on the platform | ||||
| ps_cputime | physical user/system cpu time consumed by the hypervisor | |||||
| total_requests | flush-DISK | total flush requests of the block device | ||||
| total_time_in_ms | flush-DISK | total time spend on cache flushing in milliseconds | ||||
| RDT | ipc | Number of instructions per clock per core group | per core group | |||
| memory_bandwidth | local | Local Memory Bandwidth utilization | ||||
| memory_bandwidth | remote | Remote Memory Bandwidth utilization | ||||
| bytes | llc | Last Level Cache occupancy | ||||
| Host/guest | dpdkstats | derive | rx_l3_l4_xsum_error | Number of receive IPv4, TCP, UDP or SCTP XSUM errors. | ||
| errors | flow_director_filter_add_errors | Number of failed added filters | compatible with DPDK 16.04, 16.07 (based on ixgbe, vhost support will be enabled in DPDK 16.11) | |||
| flow_director_filter_remove_errors | Number of failed removed filters | |||||
| mac_local_errors | Number of faults in the local MAC. | |||||
| mac_remote_errors | Number of faults in the remote MAC. | |||||
| if_rx_dropped | rx_fcoe_dropped | Number of Rx packets dropped due to lack of descriptors. | ||||
| rx_mac_short_packet_dropped | Number of MAC short packet discard packets received. | |||||
| rx_management_dropped | Number of management packets dropped. This register counts the total number of packets received that pass the management filters and then are dropped because the management receive FIFO is full. Management packets include any packet directed to the manageability console (such as RMCP and ARP packets). | |||||
| rx_priorityX_dropped | Number of dropped packets received per UP | where X is 0 to 7 | ||||
| if_rx_errors | rx_crc_errors | Counts the number of receive packets with CRC errors. In order for a packet to be counted in this register, it must be 64 bytes or greater (from <Destination Address> through <CRC>, inclusively) in length. | ||||
| rx_errors | Number of errors receivedreceived | |||||
| rx_fcoe_crc_errors | FC CRC Count. | |||||
| Count the number of packets with good Ethernet CRC and bad FC CRC | ||||||
| rx_fcoe_mbuf_allocation_errors | Number of fcoe Rx packets dropped due to lack of descriptors. | |||||
| rx_fcoe_no_direct_data_placement | ||||||
| rx_fcoe_no_direct_data_placement_ext_buff | ||||||
| rx_fragment_errors | Number of receive fragment errors (frame shorted than 64 bytes from <Destination Address> through <CRC>, inclusively) that have bad CRC (this is slightly different from the Receive Undersize Count register). | |||||
| rx_illegal_byte_errors | Counts the number of receive packets with illegal bytes errors (such as there is an illegal symbol in the packet). | |||||
| rx_jabber_errors | Number of receive jabber errors. This register counts the number of received packets that are greater than maximum size and have bad CRC (this is slightly different from the Receive Oversize Count register). The packets length is counted from <Destination Address> through <CRC>, inclusively. | |||||
| rx_length_errors | Number of packets with receive length errors. A length error occurs if an incoming packet length field in the MAC header doesn't match the packet length. | |||||
| rx_mbuf_allocation_errors | Number of Rx packets dropped due to lack of descriptors. | |||||
| rx_oversize_errors | eceive Oversize Error. This register counts the number of received frames that are longer than maximum size as defined by MAXFRS.MFS (from <Destination Address> through <CRC>, inclusively) and have valid CRC. | |||||
| rx_priorityX_mbuf_allocation_errors | Number of received packets per UP dropped due to lack of descriptors. | where X is 0 to 7 | ||||
| rx_q0_errors | Number of errors received for the queue. | if more queues are allocated then you get the errors per Queue | ||||
| rx_undersize_errors | Receive Undersize Error. This register counts the number of received frames that are shorter than minimum size (64 bytes from <Destination Address> through <CRC>, inclusively), and had a valid CRC. | |||||
| if_rx_octets | rx_error_bytes | Counts the number of receive packets with error bytes (such as there is an error symbol in the packet). This registers counts all packets received, regardless of L2 filtering and receive enablement. | bug - will move this to errors | |||
| rx_fcoe_bytes | number of received fcoe bytes | |||||
| rx_good_bytes | Good octets/bytes received count. This register includes bytes received in a packet from the <Destination Address> field through the <CRC> field, inclusively. | |||||
| rx_q0_bytes | Number of bytes received for the queue. | per queue | ||||
| rx_total_bytes | Total received octets. This register includes bytes received in a packet from the <Destination Address> field through the <CRC> field, inclusively. | |||||
| if_rx_packets | rx_broadcast_packets | Number of good (non-erred) broadcast packets received. | ||||
| rx_fcoe_packets | Number of FCoE packets posted to the host. In normal operation (no save bad frames) it equals to the number of good packets. | |||||
| rx_flow_control_xoff_packets | Number of XOFF packets received. This register counts any XOFF packet whether it is a legacy XOFF or a priority XOFF. Each XOFF packet is counted once even if it is designated to a few priorities. | |||||
| rx_flow_control_xon_packets | Number of XON packets received. This register counts any XON packet whether it is a legacy XON or a priority XON. Each XON packet is counted once even if it is designated to a few priorities. | |||||
| rx_good_packets | Number of good (non-erred) Rx packets (from the network). | |||||
| rx_management_packets | Number of management packets received. This register counts the total number of packets received that pass the management filters. Management packets include RMCP and ARP packets. Any packets with errors are not counted, except for the packets that are dropped because the management receive FIFO is full are counted. | |||||
| rx_multicast_packets | Number of good (non-erred) multicast packets received (excluding broadcast packets). This register does not count received flow control packets. | |||||
| rx_priorityX_xoff_packets | Number of XOFF packets received per UP | where X is 0 to 7 | ||||
| rx_priorityX_xon_packets | Number of XON packets received per UP | where X is 0 to 7 | ||||
| rx_q0_packets | Number of packets received for the queue. | per queue | ||||
| rx_size_1024_to_max_packets | Number of packets received that are 1024-max bytes in length (from <Destination Address> through <CRC>, inclusively). This registers does not include received flow control packets. The maximum is dependent on the current receiver configuration and the type of packet being received. If a packet is counted in receive oversized count, it is not counted in this register. Due to changes in the standard for maximum frame size for VLAN tagged frames in 802.3, packets can have a maximum length of 1522 bytes. | |||||
| rx_size_128_to_255_packets | Number of packets received that are 128-255 bytes in length (from <Destination Address> through <CRC>, inclusively). | |||||
| rx_size_256_to_511_packets | Number of packets received that are 256-511 bytes in length (from <Destination Address> through <CRC>, inclusively). | |||||
| rx_size_512_to_1023_packets | Number of packets received that are 512-1023 bytes in length (from <Destination Address> through <CRC>, inclusively). | |||||
| rx_size_64_packets | Number of good packets received that are 64 bytes in length (from <Destination Address> through <CRC>, inclusively). | |||||
| rx_size_65_to_127_packets | Number of packets received that are 65-127 bytes in length (from <Destination Address> through <CRC>, inclusively) | |||||
| rx_total_missed_packets | the total number of rx missed packets, that is is a packet that was correctly received by the NIC but because it was out of descriptors and internal memory, the packet had to be dropped by the NIC itself | |||||
| rx_total_packets | Number of all packets received. This register counts the total number of all packets received. All packets received are counted in this register, regardless of their length, whether they are erred, but excluding flow control packets. | |||||
| rx_xoff_packets | Number of XOFF packets received. Sticks to 0xFFFF. XOFF packets can use the global address or the station address. This register counts any XOFF packet whether it is a legacy XOFF or a priority XOFF. Each XOFF packet is counted once even if it is designated to a few priorities. If a priority FC packet contains both XOFF and XON, only this counter is incremented. | |||||
| rx_xon_packets | Number of XON packets received. XON packets can use the global address, or the station address. This register counts any XON packet whether it is a legacy XON or a priority XON. Each XON packet is counted once even if it is designated to a few priorities. If a priority FC packet contains both XOFF and XON, only the LXOFFRXCNT counter is incremented. | |||||
| if_tx_errors | tx_errors | Total number of TX error packets | ||||
| if_tx_octets | tx_fcoe_bytes | Number of fcoe bytes transmitted | ||||
| tx_good_bytes | counter of successfully transmitted octets. This register includes transmitted bytes in a packet from the <Destination Address> field through the <CRC> field, inclusively. | |||||
| tx_q0_bytes | Number of bytes transmitted by the queue. | per queue | ||||
| if_tx_packets | tx_broadcast_packets | Number of broadcast packets transmitted count. This register counts all packets, including standard packets, secure packets, FC packets and manageability packets | ||||
| tx_fcoe_packets | Number of fcoe packets transmitted | |||||
| tx_flow_control_xoff_packets | Link XOFF Transmitted Count | |||||
| tx_flow_control_xon_packets | Link XON Transmitted Count | |||||
| tx_good_packets | Number of good packets transmitted | |||||
| tx_management_packets | Number of management packets transmitted. | |||||
| tx_multicast_packets | Number of multicast packets transmitted. This register counts the number of multicast packets transmitted. This register counts all packets, including standard packets, secure packets, FC packets and manageability packets. | |||||
| tx_priorityX_xoff_packets | Number of XOFF packets transmitted per UP | where X is 0 to 7 | ||||
| tx_priorityX_xon_packets | Number of XON packets transmitted per UP | where X is 0 to 7 | ||||
| tx_q0_packets | Number of packets transmitted for the queue. A packet is considered as transmitted if it is was forwarded to the MAC unit for transmission to the network and/or is accepted by the internal Tx to Rx switch enablement logic. Packets dropped due to anti-spoofing filtering or VLAN tag validation (as described in Section 7.10.3.9.2) are not counted. | per queue | ||||
| tx_size_1024_to_max_packets | Number of packets transmitted that are 1024 or more bytes in length (from <Destination Address> through <CRC>, inclusively). This register counts all packets, including standard packets, secure packets, and manageability packets. | |||||
| tx_size_128_to_255_packets | Number of packets transmitted that are 128-255 bytes in length (from <Destination Address> through <CRC>, inclusively). This register counts all packets, including standard packets, secure packets, and manageability packets | |||||
| tx_size_256_to_511_packets | Number of packets transmitted that are 256-511 bytes in length (from <Destination Address> through <CRC>, inclusively). This register counts all packets, including standard packets, secure packets, and manageability packets. | |||||
| tx_size_512_to_1023_packets | Number of packets transmitted that are 512-1023 bytes in length (from <Destination Address> through <CRC>, inclusively). This register counts all packets, including standard packets, secure packets, and manageability packets. | |||||
| tx_size_64_packets | Number of packets transmitted that are 64 bytes in length (from <Destination Address> through <CRC>, inclusively). This register counts all packets, including standard packets, secure packets, FC packets, and manageability packets. | |||||
| tx_size_65_to_127_packets | Number of packets transmitted that are 65-127 bytes in length (from <Destination Address> through <CRC>, inclusively). This register counts all packets, including standard packets, secure packets, and manageability packets. | |||||
| tx_total_packets | Number of all packets transmitted. This register counts the total number of all packets transmitted. This register counts all packets, including standard packets, secure packets, FC packets, and manageability packets. | |||||
| tx_xoff_packets | Number of XOFF packets transmitted | |||||
| tx_xon_packets | Number of XON packets transmitted | |||||
| operations | flow_director_added_filters | This field counts the number of added filters to the flow director filters logic. | ||||
| flow_director_matched_filters | This field counts the number of matched filters to the flow director filters logic. | |||||
| flow_director_missed_filters | This field counts the number of missed filters to the flow director filters logic. | |||||
| flow_director_removed_filters | This field counts the number of removed filters from the flow director filters logic. | |||||
| mcelog (RAS memory) | errors | corrected_memory_errors | The total number of hardware errors that were corrected by the hardware (e.g. using a single bit data corruption that was correctible using ECC). These errors do not require immediate software actions, but are still reported for accounting and predictive failure analysis. | Memory (RAM) errors are among the most common errors in typical server systems. They also scale with the amount of memory: the more memory the more errors. In addition large clusters of computers with tens or hundreds (or sometimes thousands) of active machines increase the total error rate of the system. | ||
| uncorrected_memory_error | the total number of uncorrected hardware errors detected by the hardware. Data corruption has occurred. These errors require software reaction. | http://www.mcelog.org/memory.html | ||||
| corrected_memory_errors_in_%s | The total number of hardware errors that were corrected by the hardware in a certain period of time | where %s is a timed period like 24 hours | ||||
| http://www.mcelog.org/memory.html | ||||||
| uncorrected_memory_errors_in_%s | the total number of uncorrected hardware errors detected by the hardware in a certain period of time | where %s is a timed period like 24 hours | ||||
| http://www.mcelog.org/memory.html | ||||||
| Host | IPMI (specific per BMC) so these will change depending on what's supported by the BMC. This is en example for S2600WT2R platform | percent | MTT CPU2 | IPMI defines many types of sensors, but groups them into two main categories: Threshold and discrete. Threshold sensors are “analog”, they have continuous (or mostly continuous) readings. Things like fans speed, voltage, or temperature. Discrete sensors have a set of binary readings that may each be independently zero or one. In some sensors, these may be independent. For instance, a power supply may have both an external power failure and a predictive failure at the same time. In other cases they may be mutually exclusive. For instance, each bit may represent the initialization state of a piece of software. | The IPMI plugin supports analog sensors of type voltage, temperature, fan and current + analog sensors that have VALUE type WATTS, CFM and percentage (%). http://openipmi.sourceforge.net/IPMI.pdf | |
| MTT CPU1 | ||||||
| P2 Therm Ctrl % | ||||||
| P1 Therm Ctrl % | ||||||
| PS1 Curr Out % | ||||||
| voltage | BB +3.3V Vbat | |||||
| BB +12.0V | ||||||
| temperature | Agg Therm Mgn 1 | |||||
| DIMM Thrm Mrgn 4 | ||||||
| DIMM Thrm Mrgn 3 | ||||||
| DIMM Thrm Mrgn 2 | ||||||
| DIMM Thrm Mrgn 1 | ||||||
| P2 DTS Therm Mgn | ||||||
| P1 DTS Therm Mgn | ||||||
| P2 Therm Ctrl % | ||||||
| P1 Therm Ctrl % | ||||||
| P2 Therm Margin | ||||||
| P1 Therm Margin | ||||||
| PS1 Temperature | ||||||
| LAN NIC Temp | ||||||
| Exit Air Temp | ||||||
| HSBP 1 Temp | ||||||
| I/O Mod Temp | ||||||
| BB Lft Rear Temp | ||||||
| BB Rt Rear Temp | ||||||
| BB BMC Temp | ||||||
| SSB Temp | ||||||
| Front Panel Temp | ||||||
| BB P2 VR Temp | ||||||
| BB P1 VR Temp | ||||||
| fan | System Fan 6B | |||||
| System Fan 6A | ||||||
| System Fan 5B | ||||||
| System Fan 5A5A | ||||||
| System Fan 4B | ||||||
| System Fan 4A | ||||||
| System Fan 3B | ||||||
| System Fan 3A | ||||||
| System Fan 2B | ||||||
| System Fan 2A | ||||||
| System Fan 1B | ||||||
| System Fan 1A | ||||||
| CFM | System Airflow | |||||
| watts | PS1 Input Power | |||||
| Host | intel_pmu | counter | cpu-cycles | [Hardware event] | The types of events are: Hardware Events: These instrument low-level processor activity based on CPU performance counters. For example, CPU cycles, instructions retired, memory stall cycles, level 2 cache misses, etc. Some will be listed as Hardware Cache Events. Software Events: These are low level events based on kernel counters. For example, CPU migrations, minor faults, major faults, etc. http://www.brendangregg.com/perf.html#Events | |
| instructions | ||||||
| cache-references | ||||||
| cache-misses | ||||||
| branch-instructionsORbranches | ||||||
| branch-misses | ||||||
| bus-cycles | ||||||
| cpu-clock | [Software event] | |||||
| task-clock | ||||||
| page-faultsORfaults | ||||||
| minor-faults | ||||||
| major-faults | ||||||
| context-switchesORcs | ||||||
| cpu-migrationsORmigrations | ||||||
| alignment-faults | ||||||
| emulation-faults | ||||||
| L1-dcache-loads | [Hardware cache event] | |||||
| L1-dcache-load-misses | ||||||
| L1-dcache-stores | ||||||
| L1-dcache-store-misses | ||||||
| L1-dcache-prefetches | ||||||
| L1-dcache-prefetch-misses | ||||||
| L1-icache-loads | ||||||
| L1-icache-load-misses | ||||||
| L1-icache-prefetches | ||||||
| L1-icache-prefetch-misses | ||||||
| LLC-loads | ||||||
| LLC-load-misses | ||||||
| LLC-stores | ||||||
| LLC-store-misses | ||||||
| LLC-prefetch-misses | ||||||
| dTLB-loads | ||||||
| dTLB-load-misses | ||||||
| dTLB-stores | ||||||
| dTLB-store-misses | ||||||
| dTLB-prefetches | ||||||
| dTLB-prefetch-misses | ||||||
| iTLB-loads | ||||||
| iTLB-load-misses | ||||||
| branch-loads | ||||||
| branch-load-misses | ||||||
Events
NOTE: Collectd can generate events based on thresholds for any of the metrics reported in the table above. For more info please see: https://collectd.org/documentation/manpages/collectd.conf.5.shtml#threshold_configuration
...