Run Functest containers on Raspberry PI
All Functest containers (Hunter and newer) are cross-compiled for arm and arm64 via travis-ci. They are built on top of Alpine armhf to support most of Raspberry PI models.
All Docker manifests are published to run these containers via the same commands whatever the architecture.
Copy the image to the SD card
https://www.raspberrypi.org/documentation/installation/installing-images/linux.md
This is very important, as you will lose all the data on the hard drive if you provide the wrong device name. Make sure the device name is the name of the whole SD card as described above, not just a partition. For example: sdd, not sdds1 or sddp1; mmcblk0, not mmcblk0p1.
Install Docker
wget https://downloads.raspberrypi.org/raspbian/images/raspbian-2018-11-15/2018-11-13-raspbian-stretch.zip unzip 2018-11-13-raspbian-stretch.zip sudo dd bs=4M if=2018-11-13-raspbian-stretch.img of=/dev/mmcblk0 conv=fsync
Install Docker
curl -sSL https://get.docker.com | sudo sh