In this page, all details of VSPERF Testbed can be found - OPNFV Intel Pod-12
Server config:
- [CHASSIS] Chassis - Wildcat Pass Black Intel®R1304WTXXX
- [MOTHERBOARD] Wildcat Pass Server Board Intel®S2600WT2
- [CPU] Intel® Xeon DP Haswell-EP E5-2699 v3 2.3GHz
- [MEMORY] 16GB 2133 Reg ECC 1.2V DDR4 RDIMM
- [NIC] Intel® 82599EB 10 Gigabit Ethernet Controller
Booking the Testbed
Two options:
- Edit /etc/motd : Add the name and duration on every system that you will be using.
- Make a booking in Intel Pod 12 Booking Calendar
Safer would be (1).
DUT Nodes
Please use only Node-1 and Node-4 as DUT nodes.
IP: 10.10.120.21
login: opnfv
pwd: opnfv
IPMI: 10.10.120.11
----
IP: 10.10.120.24
login: opnfv
pwd: opnfv
IPMI: 10.10.120.14
Traffic Generator Nodes
Please use only Node-2 and Node-5 as TrafficGen Nodes
PLEASE SHUTDOWN THE TRAFFIC-GENERATOR VMs AFTER USE.
use the commands sudo virsh shutdown guest_name --mode acpi
IP: 10.10.120.22
login: opnfv
pwd: opnfv
IPMI: 10.10.120.11
IP: 10.10.120.25
login: opnfv
pwd: opnfv
IPMI: 10.10.120.15
Traffic Generators
Ixia Hardware Traffic Generator
Access Information
TGEN IP: 10.10.50.6
GUI HOST IP: 10.10.120.6
PORT: 9127
User: vsperf_sandbox
Card: 1
Port-1: 5
Port-2: 6
Setup Information
Spirent STC
Access Information
STCV | 10.10.120.203 |
License server | 10.10.120.245 |
LabServer | 10.10.120.246 |
Setup Information
Start:
- Login to Trafficgen Node
- Sudo virsh start stcvm4
- sudo virsh console stcvm4
- shell login with root/spirent
- ifconfig admin0 10.10.120.203
Terminate:
- Login to Trafficgen Node
- Run sudo virsh shutdown stcvm4 --mode acpi